Laboratory Scientific Instruments

Approx. Rs 14,500 / PieceGet Latest Price

Product Details:

R-4C Compact Laboratory Centrifuges Compact model is designed for routine work in medical and industrial laboratories has digital speed indicator and 0-60 minute digital countdown timer.R-4C DX has additional features of dynamic brake for quick deceleration & imbalance detector with cutoff in case of uneven loads.

Salient Features:

• Stepless speed regulator
• Safety Lid interlock to prevent cover opening during centrifugation
• Dynamic brake for quick deceleration (R-4C DX)
• Imbalance detector with cutoff (R-4C DX)

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:

Laboratory Centrifuges Manufacturers model R-8C Plus & R-8M Plus are suitable for routine sample analysis in Medical, Hospital, Pathology and heads and adaptors, those units are truly versatile.Micro Centrifuges models R-12C Plus are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

Salient Features:

• Automatic rotor identification, ensures operator safety
• Stainless Steel centrifuge Chamber, easy to clean
• Brushless Induction motor with variable frequency drive
• Microprocessor controller with digital display
• Stable speed output even under unstable voltage conditions
• Smooth & soft startLow sample temperature rise
• Inverter fault detection with auto shutdown
• 7 segment LED display of speed (R-8C Plus/R-12C Plus)
• Alphanumeric LCD display of speed & RCF (R-8M Plus)
• Selection of 3 acceleration & deceleration profiles (R-8M Plus)
• Digital countdown timer & continuous run
• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Dynamic brake for quick deceleration
• Motor overload protection
• Gas hinge to prevent door falling
• Emergency lid lock release
• Last set parameters recall (Useful for repetitive analysis)
• Wide variety of rotors & reduction adaptors

Approx. Rs 6 Lakh / PieceGet Latest Price

Product Details:

KPR -70 Plus Heavy Duty Centrifuges is a new generation Centrifuge with built in system for storage of centrifugation data. These Centrifuges are used in clinical laboratories, pharmaceutical industries, research laboratories, general biochemical work etc.Advance manufacturing techniques are used for mounting of new Brushless induction drive motor resulting in low level of vibration and noise with smooth acceleration / deceleration. The durable high capacity refrigeration system maintains precise operating temperature.

Data Acquisition System:

• KPR-70 Plus has a built in system to collect all data of the centrifugation process. The data from the centrifuge transferred to Personal Computer using a data interface like Operator code, process type, Time, Temp., RPM, RCF, Acceleration, Deceleration & Status of the process etc. can be acquired.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

 RM-02 Mini Centrifuge permits Scientists to spin down small samples ranging from 0.2 ml to 1.5 ml. Blinking pilot lamp (one blink per second) for accurate time counting in seconds to facilitate short spin.This centrifuge is ideal for Applications in PCR, Cell Separation, and Biotechnology work and in clinical labs.

Salient Features:

• PCR strip Rotor to accommodate 2 strips of 8 x 0.2ml
• 6 x 1.5 ml fixed Angle Rotors
• Adapter for 0.2 ml & 0.5 ml tubes
• Fix speed – 6000 RPM
• Safety Lid interlock to prevent cover opening during centrifugation
• Quick acceleration to full speed.Unit supplied with PCR Strip Rotor, fixed Angle Rotor and Adapters

Approx. Rs 88,000 / PieceGet Latest Price

Product Details:

RS – 24 PLUS These Rotary Shakers are ideal for mixing and development of cultures, chemicals, solvents, and assays etc. in Microbiological, Cell Culture & Life Science laboratories.The Unit has base assembly fabricated from heavy mild steel sections. Brushless Induction drive motor with frequency drive makes the unit suitable for continuous non-stop operation. Step less electronic frequency control ensures gentle start and maintains preset speed. Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution.

Salient Features:

• 4″ Large LCD display
• Universal Platform with rounded corners to accommodate interchangeable clamps of assorted sizes
• Brushless induction motor with VFD speed control
• Elegant Plastic frontVariable 
• Shaking amplitude 40 mm
• Auto start after power resumption

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Approx. Rs 6,800 / UnitGet Latest Price

Product Details:

Salient Features:

• Designed for mixing liquids in Schools, Laboratories & Factories
• Touch/ Continuous Operation mode Selection through bi-directional Switch
• Speed Regulation through knob provided on the control panel
• Interchangeable mixing heads for use with variety of tubes
• Supplied with all interchangeable mixing heads

Approx. Rs 9,500 / PieceGet Latest Price

Product Details:

These newly developed compact bench top Compact Cooling Centrifuges Micro Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint.Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile.Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.

Salient Features:

• Stable speed output
• High Capacity (CM-8 Plus)
• High Speed (CM-12 Plus)
• Wide variety of rotors & reduction adaptors
• Precise temperature control up to – 8°C
• Pre-cooling featureFast spin feature
• Calibration window on lid for speed (rpm)
• Brushless Induction motor with variable frequency drive ensures gentle start
• Microprocessor based unit with alpha numeric LCD displaySelf-diagnosis of errors
• Parameters setting through easy to use bi-directional encoder
• Inverter fault detection with auto shutdown
• CFC free refrigeration system
• 24 programme memory
• 3 Accelerations, 4 Deceleration profiles
• Choice of rpm / rcf setting & display
• Operating panel with feather touch keys
• Digital countdown timer 0-99 minutes & continuous run
• Last set parameters recall (Useful for repetitive analysis)
• Automatic door opening
• Log of cumulative centrifuge run time
• Automatic Rotor identification
• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Motor overload protection
• Gas hinge to prevent falling of door
• Emergency lid lock release

Approx. Rs 15,500 / UnitGet Latest Price

Product Details:

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Approx. Rs 3,000 / PieceGet Latest Price

Product Details:

Approx. Rs 2,000 / PieceGet Latest Price

Product Details:

Approx. Rs 4,200 / PieceGet Latest Price

Product Details:

These Medico Centrifuge are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:

Laboratory Micro Centrifuges model R – 8C & R – 8C DX are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.Micro Centrifuges models RM – 12C / RM – 12CDX are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc. DX models of Laboratory and Micro Centrifuges have additional features of dynamic brake for quick deceleration & Imbalance detector with cut off in case of uneven loads.

Salient Features:

• Digital Speed Indicator
• Stepless speed regulator
• 0-60 minutes digital countdown timer (R-8C & R-8C DX)
• 0-15 minutes digital countdown timer (RM-12C & RM-12C DX)
• Safety Lid interlock to prevent cover opening during centrifugation
• Press Switch for quick acceleration to full speed

Approx. Rs 5,600 / PieceGet Latest Price

Product Details:

These are specially designed to meet Laboratory Rotamantles requirement of convenient stirring in flask with simultaneous uniform heating by heating mantles. These have two tier constructions with the upper compartment consisting of heating element. Accurate stepless speed control allows smooth variation up to 1200 rpm. Heating energy is controlled by energy regulator.

Approx. Rs 17,600 / PieceGet Latest Price

Product Details:

Remi Bench Top Orbital Shaking Incubator Model CIS 18 Plus finds application in researches on bacteria, cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research, which have a high requirement on precision of shaking speed and temperature.Construction: Its shell is made of engineering plastics through molding with a mechanical oscillating tray driven by a motor fitted at the bottom. The Oscillating locus is circular. The duct plate behind the working chamber is SS thin plate and all the operating keys on the LCD screen are on the front side. Box door Is of a big flap structure made of transparent plastics to facilitate observation, removal or placement of cultures. Closed-loop control of temperature and speed is effected with microcomputer electronic controller using PID regulation mode with LCD screen display. Hot and cold air stream is circulated through a blower behind the duct plate in the working chamber, thereby improving the uniformity of temperature in the working chamber.Safety Multiple start of compressor in a short time is prevented and the controller performs the function of prolonged start before compressor is started.When the measured temperature is in excess of the set temperature by 3°C, the buzzer will give an over-temperature alarm and simultaneously the heater will shut down. When the box door opens, the door switch will cut off the power to stop the Heater, blower and rotating fan from work and the operator can remove or place the cultures safely.

Salient Features:

• Stainless-steel chamber and platform easy to clean
• Transparent plastic door
• Microprocessor controller with large LCD screen for temperature and shaking speed with timing function
• Self-check function easy to identify problems
• Smooth start and stop system prevents liquid spillage
• Auto-controller of fan speed to prevent damage to the samples
• Safety door switch, auto pause operation when it is opened.

Approx. Rs 1.6 Lakh / PieceGet Latest Price

Product Details:

Remi Humidity Chambers Seed Germinators are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and Humidity.These chambers are available in standard & GMP versions.

Salient Features:

• Precise monitoring of temperature and humidity conditions
• Unique design of thermal barrier for better energy efficiency
• Machine filled PUF insulation to eliminate void pockets
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Heating by long life SS tubular heaters
• Hermetically sealed Compressor with CFC free refrigerant
• Chamber calibration port on side
• Adjustable trays
• Output for remote alarm
• Microprocessor controller with LCD display & capacitance type sensor
• 4″ attractive LCD display for direct display of humidity & temperature
• Auto tuning of controller
• Settable High / low alarm points with date and time
• Centronic interface to record Temperature, Humidity, Date & Time by attaching Dot Matrix printer with Adjustable print interval
• Remi “Datasoft”™ data acquisition software as per 21 CFR part 11 requirements (Optional)
• Power failure and resumption recorded with date and time
• PC communication through RS-485 with data acquisition software
• High temperature safety cut off & alarms for high / lowset parameters
• Low water level alarm and power cutoff of boiler tank heater
• Overload cut off relay for compressor
• Rounded inner chamber for easy cleaning
• Attractive door profile
• Data logger for 8 Point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)

Optional:

• Touch screen display ( TFT ) with additional features(Details overleaf)
• Validation protocol with IQ, OQ, PQ Documentation

Approx. Rs 2 Lakh / PieceGet Latest Price

Product Details:

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

Salient Features:

• Fulfills storage conditions of 25°C “ 60% RH, 40°C “ 75% M RH, 30°C “ 65% RH, 25°C “ 40% RH
• Precise monitoring of temperature and humidity conditions
• Unique design of thermal barrier for better energy efficiency
• Machine filled PUF insulation to eliminate void pockets
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
• Hermetically sealed Compressor with CFC free refrigerant
• Chamber calibration port on side
• Adjustable trays
• Output for remote alarm
• Microprocessor controller with LCD display & capacitance type sensor
• 4 ” attractive LCD display for direct display of humidity & temperature
• Auto tuning of controller
• Battery Backup for Controller
• Settable High / Low alarm points
• Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
• REMI ‘Datasoft’ data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
• Power failure and resumption recorded with date and time
• PC communication through RS “ 485 with data acquisition software
• High temperature safety cut off & alarms for high/low set parameters
• Low water level alarm and power cutoff of boiler tank heater
• Time delay for compressor switch on
• Overload cut off relay for compressor
• Rounded inner chamber for easy cleaning
• Auto door closer
• Attractive door profile
• Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)

Optional:

• Touch screen display ( TFT ) with additional features(Details overleaf)
• Validation protocol with IQ, OQ, PQ Documentation

Approx. Rs 1.76 Lakh / PieceGet Latest Price

Product Details:

Remi Orbital Shaking Incubators are designed for precise temperature control and simultaneous shaking applications required in fermentations studies, enzyme reaction s, life sciences, tissue culture and biotechnology, research labs.These chambers are available in standard & GMP versions.

Salient Features:

• Brushless induction Motor with variable frequency drive suitable for continuous operations
• Step less variable frequency drive ensures gentle shaking start and maintains set speed
• Counter balanced mechanism for high stability in uneven load of different sized flasks
• Universal Shaking Platform to accommodate different sized assorted flasks
• Maximum shaking capacity “ 9 Flasks x 2000 ml
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Heating by long SS tubular heaters
• Additional tray to store samples
• Chamber calibration port on side
• Hermetically sealed Compressor with CFC free refrigerant (CIS“24 Plus)
• Microprocessor controller with 4 LCD display for display of shaking speed & temperature
• 9 programs memory
• Power failure and resumption recorded with data and time.
• High temperature safety cut off & alarms for high / low set temperature
• Electrical circuit breaker
• Time delay for compressor switch on (CIS“24 Plus)
• Overload cut off relay for compressor (CIS“24 Plus)
• Rounded inner chamber for easy cleaning
• Attractive door profile

Optional:

• Touch screen display ( TFT ) with additional features(Details overleaf)
• Validation protocol with IQ, OQ, PQ Documentation

Approx. Rs 1.1 Lakh / PieceGet Latest Price

Product Details:

Approx. Rs 1.6 Lakh / PieceGet Latest Price

Product Details:

These Plus series Refrigerated Centrifuges Manufacturers are designed for centrifugation of temperature sensitive material and find application in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical & Clinical research laboratories.All the centrifuges have rust proof, easy to clean Stainless Steel centrifuge inner chamber with steel guard. A wide variety of swing out and angle rotors with a choice of reduction adaptors make these units truly versatile.Users can select models as per their requirements from high volume low speed Centrifuges (C-23 Plus, CPR-23 Plus), low volume high speed centrifuges (C-24 Plus, CPR-24 Plus) in table top design & compact high-speed high volume (C-30 Plus, CPR-30 Plus) floor standing centrifuges.

Approx. Rs 20,000 / PieceGet Latest Price

Product Details:

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Approx. Rs 7,500 / PieceGet Latest Price

Product Details:

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Approx. Rs 1.02 Lakh / PieceGet Latest Price

Product Details:

Approx. Rs 10,000 / PieceGet Latest Price

Product Details:

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:

Approx. Rs 58,000 / UnitGet Latest Price

Product Details:

The REMI Deep Freezers are designed for storage of biological samples in biotech, life science, clinical research as well as medical & pharmaceutical specimens, serums, vaccines, blood components. These freezers are available with temperatures up to -20°C and “ 40°C.These freezers are available in standard & GMP versions.

Salient Features:

• Upright models with small foot prints
• Validation protocol with IQ, OQ, PQ Documentation as per ICH guideline
• Machine filled PUF insulation to eliminate void pockets
• Hermetically sealed Compressor with CFC free refrigerant
• Unique design of thermal barrier for better energy efficiency
• Microprocessor controller with LED display
• Sensor failure alarm
• Digital LED display of Temperature with set, process value & audio visual alarm
• Adjustable trays
• Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
• Also available 4 LCD version with additional features
• Alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Approx. Rs 4.25 Lakh / PieceGet Latest Price

Product Details:

Remi Walk In Stability Chamber are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI Datasoft software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.

Construction:

• Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
• Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
• GMP model with inner (316Grade) and outer of Stainless Steel (304 Grade)
• CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
• Heating by long lasting SS tubular heaters
• Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
• Forced Air Circulation by heavy duty motor
• SS racks and trays

Features:

• Microprocessor based auto tuning PID controller provided for precise control of temperature and humidity
• Auto change over to standby systems through PLC (Optional)
• Auto switch over to standby sensor in case of Controlling Sensor failure
• PLC with touch screen HMI fully protected with password, instead of PID controller for precise control of temperature and humidity (optional)
• Data stored in PC server with LAN connectivity and password protection (Optional with software)
• GSM mobile alert on six cell phones via SMS in case of temperature and humidity deviations beyond specified Limits (Optional with software)
• Capacitance type Humidity sensor enables direct display of RH and temperature (STABILITY CHAMBERS)
• PC communication via Ethernet/RS-485 and software complying to 21CFR part 11 USFDA guidelines (Optional)
• Multipoint Temperature and Humidity logger with printout facility (optional)
• Facility to open the door from inside in case of door locked with emergency bell having switch inside chamber
• Thirty chambers connected to one software
• Integration with BMS
• Capacitance type Humidity sensor enables direct display of RH and temperature (STABILITY CHAMBERS)
• PC communication via Ethernet/RS-485 and software complying to 21CFR part 11 USFDA guidelines (Optional)
• Multipoint Temperature and Humidity logger with printout facility (optional)
• Facility to open the door from inside in case of door locked with emergency bell having switch inside chamber
• Thirty chambers connected to one software
• Integration with BMS
• Audio visual alarm for temperature, humidity variations and utility failures
• Output for remote alarm in lab and at security gate
• Magnetic door lock system with biometrics for door access and software to monitor door open log (Optional)
• Safety includes shut off of humidity and air heaters in case of temperature overshoots or undershoots beyond specified limits with alarms
• Electrical circuit breaker
• Low water level alarm and power cut off of boiler tank heater
• Overload cut off relay for compressorTime delay for compressor switch on

Approx. Rs 13,000 / PieceGet Latest Price

Product Details:

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Approx. Rs 1 Lakh / PieceGet Latest Price

Product Details:

Product Price :Get Latest Price

Product Details: