Satish Enterprises

Polylab Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These Autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.

Specification:

Micro Centrifuge Tube MCT Twin Rack Polylab provides this twin purpose rack for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.

Centrifuge Tube Round Bottom Polylab centrifuge tubes with round bottom are moulded in polypropylene & polycarbonate. These tubes have excellent clarity and are strong enough to be used Upto 50,000xG. These tubes can be autoclaved; however, repeated autoclaving in PC tubes reduces their mechanical strength.

Carboy With Stop Cock Adding in line of Polylab Aspirators, these polypropylene Carboys are Autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.

This rack, as the name suggests, is used for keeping PCR Tube Rack. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multi pipettes. A no.of racks can be stacked together to save shelf space.

Centrifuge Tube Conical Bottom Polylab centrifuge tubes with conical bottom are available in two sizes i.e. 15 ml. & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These Autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leak-proof. These tubes can withstand forces Upto 7500xG & 12000xG for 15 ml. & 50 ml. tubes respectively.

Sample Container Press & Fit Type  Made of polypropylene, these disposable containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit manner & make these containers leak proof. These disposable containers are E.T.O sterilized.

These long stem Funnels-Long Stem have smooth walls, 60° cone angle and external ribs to prevent air lock. Moulded in polypropylene, these clear funnels can also be steam autoclaved.

Plain Desiccator are physically the same as Vacuum desiccators. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vacuum & Plan Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.

Specification:

These Atomic Model Set consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.
SENIOR SET: This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.
JUNIOR SET: This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.

Specification:

These handy Measuring Jugs, moulded in Polypropylene, are clear, Autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.

Specification:

These Urine Container can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these containers have excellent contact clarity and the cap has built-in seal that makes it completely leak-proof.

These Stool Container, as the name suggest, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.

In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.

Round Test Tube Stand A handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This Autoclavable rack can be easily disassembled for cleaning purpose.

Polylab Aspirator Bottles are made of polypropylene and are therefore much lighter than glass. These are Autoclavable, dependable & durable. The leak proof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving

These Wash Bottles New Type are also made of low density polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to give an approximate idea about the volume of solutions filled or dispensed.

These polypropylene Test Tube With Screw Cap provide excellent option for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.

These Connectors (T & Y) add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leak proof grip to the tube.

Made of Polypropylene, these corrosion free Funnel Holder can hold funnels with. The extra plate provided can be placed to hold. Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

This detachable stand can hold 12 pipettes, 6 on each side, in a Horizontal Pipette Stand position.Moulded in polypropylene, this Autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

This Vertical Pipette Stand  is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top discs that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centred.

This Autoclavable Test Tube Stand is perhaps the most commonly used test tube stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes whereas the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.

Specification:

These ingenious racks with a 3-Tier Test Tube Stand design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC Rack has transparent upper & middle plates where as in PP racks; every part is coloured & opaque. These Autoclavable racks can withstand sub-freezing temperatures.

Specification:

Polylab Wash Bottles are made of low density polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.

Polylab Kipp's Apparatus made of polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H₂S gas then evolved collects in the middle dome from where it can be released through a leak proof stopcock fitted with a self-lubricating PTEE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.

Specification:

Moulded in Polypropylene, Spatula Consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

Specification:

These Fisher Clamp are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Specification:

Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10 Ltr. Capacity. This stackable flask stand can also be steam autoclaved.

These non-corrosive, moulded Retort Stand provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm X 750 mm can be screwed into the heavy base giving way to a perfectly stable retort stand. 


Specification: